11 April 2019

The weapon of choice for Power Quality issues

Trouble shooting power quality issues is always difficult because the faults are often intermittent; murphy’s law says they will never happen when the technician is on site.

In addition, many faults are complex, often dependent on a number of supply and load events coinciding to produce the fault.
This is where the Fluke 1740 series Power Quality Logger is an indispensable tool for trouble shooting. Simply connect up the Fluke 1740 and start recording.

After capturing data for hours, days or even weeks the Fluke Instrument has a useful range of analytical tools that will scan the data and identify faults and trends.

The captured data is time logged, enabling identifying events that might be contributing to the problem. Power Quality is often caused when the mains supply is affected by a number of large loads from nearby users coming on line simultaneously, for example when factories switch on for the day, or air-conditioning systems on time clocks all kick-in at the same time.

The data logger will capture all events and store them in memory ready for later analysis enabling the pinpointing of transient events allowing more informed deductions about their cause.

Three portable models

Fluke provide the 1740 series in three flavors...
Fluke 1742 – basic logger for energy and load studies
Fluke 1746 – is the basic power logger
Fluke 1748 – is the advanced power quality logger with waveform capture and RMS profile capture of events.
Each model can be fitted with add-on modules to provide further capture and analysis capabilities.

Key product features

The versatility of the Fluke 1740 series is apparent when you scan the key product features…

Measurement input ports

Four voltage monitoring inputs allowing connecting to single up to 3 phase loads.

Four current sensing input channels.

The instrument can be configured to 10 different power topologies covering the full range of single and multi-phase connections making it an extremely versatile instrument.

2 analog auxiliary ports with range selection from 0 to 10 volts, or 0 to 1000 volts allowing the instrument to record output from a wide range of sensors that generate voltage representation of measured events.

This feature allows collecting parallel data from associated events that might be suspected of contributing to Power Quality issues (temperature, pressure, rotation speed, switching on of particular loads etc.)

Instrument power options

The instrument can be parasitically powered from the measurement line self-adapting to voltages from 100 to 500 volts.

Of course if one of the power quality issues is low-voltage events or power outages, you don’t want the instrument powering off, so the Fluke has a built-in 4 hour battery back-up to allow it ride through outages without powering down.

Data interface

Each instrument in the Fluke 1740 series provides of data connections including USB A, USB mini B, Ethernet, Wi-Fi and Bluetooth connection to other devices – makes hooking-up to a laptop or PC easy.

The Ethernet connection is particularly useful for long term or permanent connection if you wish to set-up the Fluke 1740 series for a remotely accessed monitoring system or including it as a permanent data capturing device.

General features

Auto-configuration with self-checking
IP65 Rating

EN50160 Analysis (Power Quality Health)

The Fluke 1740 Series is suitable for capturing measurements required for EN50160 Analysis (Dips, swells, and inrush currents: Including event waveform snapshots (slow transients), Harmonics, THD, TDD, TID, unbalance, flicker, rapid voltage changes, mains signaling, inrush current.

Further information

Remtron can provide an onsite demonstration of the products.
Contact one of our sales consultants for more information.
[Download Brochure]